--- title: "Preparing to accept a management request using the CLI" slug: "preparing-to-accept-a-management-request-using-the-cli-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/preparing-to-accept-a-management-request-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Preparing to accept a management request using the CLI Follow these steps to prepare the Central Management System appliance to accept or reject a request by an appliance to be added for management. To prepare to accept a request to be managed: 1. Log in to the Central Management System CLI. 2. Verify that the rendezvous process is enabled: ``` cm-hostname > enable cm-hostname # show cmc rendezvous ``` 3. If` Server rendezvous enabled: no `is shown, enable the rendezvous process and save your changes: ``` cm-hostname # configure terminal cm-hostname (config) # cmc rendezvous server enable cm-hostname (config) # write memory ``` :