--- title: "Providing access to SNMP data" slug: "providing-access-to-snmp-data" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T23:58:50Z published: 2026-09-08T23:58:50Z canonical: "docs.trellix.com/providing-access-to-snmp-data" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Providing access to SNMP data To allow access to SNMP v3 data, configure a username and password. Prerequisites - Operator or Admin access To enable access to SNMP data: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Verify that SNMP is enabled: ``` hostname (config) # show snmp ``` If the output shows `SNMP enabled: no`, enter the `snmp-server enable` command. 3. *SNMP v3*: Specify the SNMP user and password: ``` hostname (config) # snmp-server user v3 enable hostname (config) # snmp-server user v3 auth sha ``` 4. Save your changes: ``` hostname (config) # write memory ``` :