--- title: "Providing advanced notice of a required password change on the CLI" slug: "providing-advanced-notice-of-a-required-password-change-on-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:20Z published: 2026-09-01T19:03:20Z canonical: "docs.trellix.com/providing-advanced-notice-of-a-required-password-change-on-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Providing advanced notice of a required password change on the CLI You can provide advanced warning that a user's password will expire (from 2 through 999 days), allowing the user time to change the password before he or she is locked out of the system. For a managed appliance, you can perform this procedure on the Central Management System appliance as well as the local appliance. The procedure remains the same. However, you will need to take the additional step to locate the appliance on the Central Management System CLI. For instructions on locating an appliance on the Central Management System CLI, see the *Trellix Central Management System Administration Guide*. Prerequisites - Admin access To configure the advance notice about a pending password change: 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. To specify the number of days of advance notice, use the following command: ``` aaa authentication password local require-change advance-warning ``` where` <days> `is a values from 1 through 999. ### Note When you specify `1`, the unit of measurement is minutes, not days. This allows you to test your configuration without waiting a full day to see the results. 3. Verify your change: ``` hostname (config) # show aaa authentication password ``` 4. Save your changes: ``` hostname (config) # write memory ``` ### Note To remove a configuration, append` no `to the command. For example, to remove the requirement for all users to change their passwords the next time they log in, use the `no aaa authentication password local require-change force all` command. :