--- title: "R" slug: "r" updated: 2026-08-25T13:50:04Z published: 2026-08-25T13:50:04Z canonical: "docs.trellix.com/r" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # R ### RADIUS authentication protocol For compliance, RADIUS authentication must be disabled. ##### Standards FIPS 140-3, CC-NDcPP ##### CLI configuration command `aaa authentication login default {ldap | local}` ##### CLI show command `show aaa` ### Random number generator For compliance, the TPM hardware-based random number generator must be enabled for good entropy. ##### Standards FIPS 140-3, CC-NDcPP ##### CLI configuration commands `tpm enable` `tpm rng enable` ##### CLI show command `show tpm` ### Remote syslog certificate verification For strict compliance with the Common Criteria (CC-NDcPP) standard, syslog server certification verification for remote logging fails if the certificate is configured with an IP address in the Common Name (CN) field, a change from previous behavior. To configure a remote syslog server by its IP address, the IP address must be in the Subject Alternative Name (subjectAltName) field. The following commands support configuration of explicit X.509 rules to match the subjectAltName field of a certificate by hostname, IP address, or email address. ##### CLI configuration commands `[no] logging <hostname-or-IP-address> tls certificate match-x509-cert-san-or cn-hostname <hostname-to-match>` `[no] <hostname-or-IP-address> tls certificate match-x509-cert-san-ipv4-or-ipv6 <IP-address-to-match>` `[no] logging <hostname-or-IP-address> tls certificate match-x509-cert-san-email <email-addr>` ##### CLI show command `show logging` ### Remote syslog encryption For compliance, all syslog communications (both received from other hosts and sent to other hosts) must be over FIPS 140-3 mode, TLS 1.0 or better and have compliant cipher lists and certificate verification. ##### CLI configuration commands `no logging receive protocol udp port <port>` `no logging receive protocol tcp port <port>` `logging receive ssl cipher-list {fips | fips-high-security | cc-ndpp | cc-ndpp-high-security | fips-and-cc-ndpp | fips-and-cc-ndpp-high-security}` `logging receive ssl min-version tls1` `no logging <host> protocol udp port <port>` `no logging <host> protocol tcp port <port>` `logging remote ssl min-version tls1` `logging remote ssl cipher-list fips-and-cc-ndpp` `logging remote ssl cert-verify` ##### CLI show command `show logging` ### Restricted commands license For compliance, the RESTRICTED_CMDS licenses must be disabled. ##### Standards FIPS 140-3, CC-NDcPP ##### CLI configuration command `no compliance options restricted-license enable` ##### CLI show command `show compliance options` :