--- title: "radius-server host <ip address> auth-port" slug: "radius-server-host-ip-address-auth-port" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/radius-server-host-ip-address-auth-port" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # radius-server host <ip address> auth-port Configures a RADIUS server on the specified port. The default is port 1812. > [!NOTE] > Note > > This command overrides the global authentication port configured with the `radius-server auth-port` command. ### Syntax `[no] radius-server host <ip address> auth-port <port number>` ### Parameters `no` Use the `no` form of this command to remove the specified RADIUS server or to restore 1812 as the authentication port. `ip address` Specify the IPv4 or IPv6 address of the RADIUS server. `port number` Specify the UDP port number. The default is 1812. Valid values are 1–65535. ### Examples The following example sets 1645 as the authentication port to use with the specified RADIUS server. ``` hostname (config) # radius-server host 192.168.1.1 auth-port 1645 ``` The following example restores 1812 as the authentication port. ``` hostname (config) # no radius-server host 192.168.1.1 auth-port 1645 ``` The following example removes the RADIUS server from the configuration. ``` hostname (config) # no radius-server host 192.168.1.1 auth-port 1812 ``` ### User Role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Central Management System:** Before release 6.4. Support for IPv6 addresses was added in Release 8.3. - **Email Security — Server:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **File Protect:** Before Release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Intelligent Virtual Execution - Server:** Release 7.9. Support for IPv6 addresses was added in Release 8.2.