--- title: "radius-server host <ip address> key" slug: "radius-server-host-ip-address-key" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/radius-server-host-ip-address-key" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # radius-server host <ip address> key Configures a RADIUS server and specifies the shared secret key used to communicate with this RADIUS server. > [!WARNING] > Important > > The key you configure on the appliance must match the key that was configured on the RADIUS server. > [!NOTE] > Note > > For security, you can use the `radius-server host <ip address> prompt-key` command to be prompted to enter and confirm the key, with the entries masked with `*` characters. > [!NOTE] > Note > > This command overrides the global key configured with the `radius-server key` command. ### Syntax `radius-server host <ip address> key <key string>` ### Parameters `ip address` Specify the IPv4 or IPv6 address of the RADIUS server. > [!NOTE] > Note > > Link-local and site-local IPv6 addresses are not supported. `key string` Specify the secret key string that was configured on the RADIUS server. ### Example The following example adds the secret key for the specified RADIUS server. ``` hostname (config) # radius-server host 192.168.1.1 key 123456 ``` ### User Role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Central Management System:** Before release 6.4. Support for IPv6 addresses was added in Release 8.3. - **Email Security — Server:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **File Protect:** Before Release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Intelligent Virtual Execution - Server:** Release 7.9. Support for IPv6 addresses was added in Release 8.2.