--- title: "radius-server host <ip address> prompt-key" slug: "radius-server-host-ip-address-prompt-key" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/radius-server-host-ip-address-prompt-key" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # radius-server host <ip address> prompt-key Configures a RADIUS server and prompts the user to enter and confirm the secret key. For security, the entries are masked with `*` characters. > [!WARNING] > Important > > The key you configure on the appliance must match the key that was configured on the RADIUS server. > [!NOTE] > Note > > Alternatively, you can use the `radius-server host <ip address> key <key string>` command to enter the key string in plain text. ### Syntax `radius-server <ip address> prompt-key` ### Parameters `ip address` Specify the IPv4 or IPv6 address of the RADIUS server. > [!NOTE] > Note > > Link-local and site-local IPv6 addresses are not supported. ### Example The following example sets the IP address of the RADIUS server and prompts for the secret key. ``` hostname (config) # radius-server host 192.168.1.1 prompt-key Key: ******** Confirm: ******** ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Central Management System:** Before release 6.4. Support for IPv6 addresses was added in Release 8.3. - **Email Security — Server:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **File Protect:** Before Release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Intelligent Virtual Execution - Server:** Release 7.9. Support for IPv6 addresses was added in Release 8.2.