--- title: "radius-server host <ip address> retransmit" slug: "radius-server-host-ip-address-retransmit" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/radius-server-host-ip-address-retransmit" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # radius-server host <ip address> retransmit Specifies the number of times the appliance will retransmit a request to authenticate with the specified RADIUS server before the request fails. The default is 1. If you specify 0, no retransmit attempts will be made. > [!NOTE] > Note > > This command overrides the global number configured with the `radius-server retransmit` command. ### Syntax `radius-server host <ip address> retransmit <retries>` ### Parameters `ip address` Specify the IPv4 or IPv6 address of the RADIUS server. `number` Specify the number of retry attempts. Valid values are 0–5. The default is 1. ### Examples The following example specifies that authentication requests to the specified RADIUS server should be retried two times before failing. ``` hostname (config) # radius-server host fdd3:c75:345::8a4 retransmit 2 ``` The following example disables retry attempts on the specified RADIUS server. ``` hostname (config) # radius-server host fdd3:c75:345::8a4 retransmit 0 ``` ### User Role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Central Management System:** Before release 6.4. Support for IPv6 addresses was added in Release 8.3. - **Email Security — Server:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **File Protect:** Before Release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Intelligent Virtual Execution - Server:** Release 7.9. Support for IPv6 addresses was added in Release 8.2.