--- title: "radius-server host" slug: "radius-server-host" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:21:49Z published: 2026-08-04T17:21:49Z canonical: "docs.trellix.com/radius-server-host" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # radius-server host Adds a RADIUS server to the appliance configuration using the default port number (1812). The RADIUS server is enabled by default after it is added to the configuration. The `no` form of the command removes a RADIUS server from the configuration. > [!NOTE] > Note > > You can add multiple RADIUS servers to an appliance. The appliance contacts the servers in the order in which they were added. If the first server in the list in unreachable, the appliance contacts the next server, and so on. > [!NOTE] > Note > > To configure multiple services on a single RADIUS server, use the `radius-server host <ip address> auth-port` command and specify a unique UDP port for each service. ### Syntax `[no] radius-server host <ip address>` ### Parameters `no` Use the `no` form of this command to remove a RADIUS server from the configuration. `ip address` Specify the IPv4 or IPv6 address of the RADIUS server. > [!NOTE] > Note > > Link-local and site-local IPv6 addresses are not supported. ### Examples The following example adds a RADIUS server to the configuration. ``` hostname (config) # radius-server host 192.168.1.1 ``` The following example removes the RADIUS server from the configuration. ``` hostname (config) no radius-server host 192.168.1.1 ``` ### User role Admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Central Management System:** Before release 6.4. Support for IPv6 addresses was added in Release 8.3. - **Email Security — Server:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **File Protect:** Before Release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4. Support for IPv6 addresses was added in Release 8.2. - **Intelligent Virtual Execution - Server:** Release 7.9. Support for IPv6 addresses was added in Release 8.2.