--- title: "raidrepair" slug: "raidrepair-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/raidrepair-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # raidrepair This command repairs the RAID1 SSD component exhibiting a fault. Select `raidrepair current <ssd0|ssd1>` to repair the faulty SSD within the Sensor. Select `raidrepair new <ssd0|ssd1>` to replace the faulty SSD with a new SSD, and to restore the data on RAID1 it synchronizes the data of the healthy SSD with the new SSD. > [!NOTE] > Note > > RAID is not supported on NS9600, NS7600, NS7500, NS7x50, NS7x00, NS5x00, NS3600, NS3500, and NS3x00 Sensors. **Syntax:** `raidrepair <new|current> <ssd0|ssd1>` | Parameter | Description | | --- | --- | | new | When a complete reimage of a single disk is required | | current | When the disk is corrupted | | ssd0 | Disk is located in the upper bay within the chassis. | | ssd1 | Disk is located in the lower bay within the chassis. | **Applicable to:** NS9500, NS9300, NS9200, and NS9100 Sensors