--- title: "Reboot a device from the Manager" slug: "reboot-a-device-from-the-manager-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/reboot-a-device-from-the-manager-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reboot a device from the Manager You can reboot the device from the Manager. Certain devices support full reboot and hitless reboot. Full reboot restarts the entire system, whereas a hitless reboot restarts select processes but not the entire system. > [!NOTE] > Note > > Full reboot can take up to 10 minutes, whereas hitless reboot can be completed in about 3-4 minutes. 1. For a standalone Sensor, go to **Devices** → **** → **Devices** → **** → **Maintenance** → **Reboot**. For Sensors in a stack, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Maintenance** → **Reboot**. The **Reboot** page is displayed. 2. Click **Reboot Now**. 1. To perform a hitless reboot, clear the **Full Reboot** checkbox, then click **Reboot Now**. 3. Click **OK** to confirm reboot. > [!NOTE] > Note > > You can also perform the Sensor reboot from **Devices** → **** → **Global** → **Device Manager**. Select the **Sensors** tab and choose the required Sensor from list. Select **Reboot** from **Other Actions** drop-down. A **Warning** dialog box is displayed. You can perform either partial or full reboot depending on the requirement.