--- title: "Reboot a Sensor using the Manager" slug: "reboot-a-sensor-using-the-manager-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:36Z published: 2026-11-19T12:30:36Z canonical: "docs.trellix.com/reboot-a-sensor-using-the-manager-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reboot a Sensor using the Manager The **Reboot Sensor** action restarts a Sensor. You perform this action in the Manager interface. To reboot a Sensor, do the following: 1. For a standalone Sensor, go to **Devices** → **** → **Devices** → **** → **Maintenance** → **Reboot** For Sensors in a stack, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Maintenance** → **Reboot** 2. Click **Reboot**. > [!NOTE] > Note > > You can also perform Sensor reboot from **Devices** → **** → **Global** → **Device Manager**. For a standalone Sensor, select the **Sensors** tab. For Sensors in stack, select the **Stacks** tab. From the list, choose the required Sensor and select **Reboot** from **Other Actions** drop-down. A **Warning** dialog box is displayed. Select the required reboot type.