--- title: "Reboot, Halt, or Reset an Active Fail-Open module" slug: "reboot-halt-or-reset-an-active-fail-open-module" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/reboot-halt-or-reset-an-active-fail-open-module" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reboot, Halt, or Reset an Active Fail-Open module > [!NOTE] > Note > > You can remove or insert a 100 Gigabit Active Fail-Open module into one of its slots even when the chassis is powered up. However, a system (chassis) reboot is required to make the module active. Go to **System** → **Reboot/Halt/Reset**. ![GUID-063C1C61-F6CF-4383-AE23-BBF8062F3CB8-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6603eef7-6bdd-e454-0832-51022be3929e.jpg?sv=2026-02-06&spr=https&st=2026-11-20T19%3A27%3A42Z&se=2026-11-20T20%3A27%3A42Z&sr=c&sp=r&sig=WsXYx7kApqurRALQjUEbRcMsGJd7VRDwihuJxS9yinM%3D) Refer to the following steps to reboot the device, halt and remove the device, or reset the device to factory defaults. **Steps:** 1. To reboot the device, click **Reboot**. ![GUID-389823C4-9E74-404B-B1CE-63EE753045D1-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-685a76a3-a05e-16a2-c07a-3532cb1e554d.jpg?sv=2026-02-06&spr=https&st=2026-11-20T19%3A27%3A42Z&se=2026-11-20T20%3A27%3A42Z&sr=c&sp=r&sig=WsXYx7kApqurRALQjUEbRcMsGJd7VRDwihuJxS9yinM%3D) 2. To shut down the device, click **Halt**. The device shuts down. When the Fail-Open module is powered off, remove the captive screws and slide it out of the chassis. > [!NOTE] > Note > > The chassis can be powered up again only by pressing the power button in front of the chassis. 3. To reset the device, click **Reset**. It resets the device to default parameters. > [!NOTE] > Note > > You have to reconfigure the network settings for SSH or HTTPS connectivity.