--- title: "Rebuilding Storage" slug: "rebuilding-storage-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/rebuilding-storage-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Rebuilding Storage You can rebuild the storage erased with the `build local` command. > [!WARNING] > Important > > System processes restart during storage reconstruction. > > The **build local** command will permanently erase all data on the disk as the process involves reformatting the disk and creating a new partition layout. To rebuild all your NDR storage: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Rebuild the storage. By default, storage is rebuilt to its former location. `npadmin@hostname > build local` A new storage configuration is immediately built.