--- title: "reconnectalertandpktlogchannels" slug: "reconnectalertandpktlogchannels-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/reconnectalertandpktlogchannels-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # reconnectalertandpktlogchannels This command re-establishes the alert and packet log channel connection (broken by issuing a `disconnectalertandpktlogchannels` command) between the Sensor and Manager. The connection can only be re-established when the trust between the Sensor and Manager is not broken (for example, a deinstall breaks trust as well as disconnects the alert and packet log channel and issuing the `reconnectalertandpktlogchannels` command will not re-establish connectivity if the certificates establishing trust between the Sensor and Manager are cleared). This command has no parameters. **Syntax:** `reconnectalertandpktlogchannels` On executing the command, the following message is displayed: `this will take a couple of seconds , please check status on CLI` **Applicable to:** NS-series Sensors