---
title: "reconnectalertandpktlogchannels"
slug: "reconnectalertandpktlogchannels"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:56Z
published: 2026-10-05T15:40:56Z
canonical: "docs.trellix.com/reconnectalertandpktlogchannels"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# reconnectalertandpktlogchannels
This command re-establishes the alert and packet log channel connection (broken by issuing a disconnectalertandpktlogchannels command) between the Sensor and Manager. The connection can only be re-established when the trust between the Sensor and Manager is not broken (for example, a deinstall breaks trust as well as disconnects the alert and packet log channel and issuing the reconnectalertandpktlogchannels command will not re-establish connectivity if the certificates establishing trust between the Sensor and Manager are cleared).
This command has no parameters.
**Syntax:**
reconnectalertandpktlogchannels
On executing the command, the following message is displayed:
this will take a couple of seconds , please check status on CLI
**Applicable to:**
NS-series Sensors