--- title: "Refreshing a CRL file using the configuration menu" slug: "refreshing-a-crl-file-using-the-configuration-menu-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/refreshing-a-crl-file-using-the-configuration-menu-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Refreshing a CRL file using the configuration menu Use the menu options in this section to refresh a local Certificate Revocation List (CRL) file by downloading a new file from a specified remote location so that the NDR appliance can validate certificate revocation. Only one CRL file can be present on the system. When you download a new CRL file, the existing CRL file is automatically deleted. > [!NOTE] > Note > > You must specify the URL of the direct path to the certificate file. To refresh a local CRL file: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter configuration CAC menu. `npadmin@ia(config)# authentication` 6. In the CAC/PIV configuration menu, select `2` to configure the current authentication method. 7. In the PKI Configuration menu, select `3` to enter the CRL Configuration menu. The following appears: ![CRL_Refresh.JPG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c6e70da6-ed46-9023-5c71-94a33838337b(4).JPG?sv=2026-02-06&spr=https&st=2026-11-19T11%3A50%3A31Z&se=2026-11-19T12%3A50%3A31Z&sr=c&sp=r&sig=iLcgK2km0VpFA2gaPfnCU2tUsiHuJlaDQxkAHQHybiY%3D) 8. Select `2` to configure the CRL retrieval interval. 9. Select `Q` to save your changes and exit the menu