--- title: "Refreshing the asymmetric flow statistics cache using the CLI" slug: "refreshing-the-asymmetric-flow-statistics-cache-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:26Z published: 2026-09-12T20:42:26Z canonical: "docs.trellix.com/refreshing-the-asymmetric-flow-statistics-cache-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Refreshing the asymmetric flow statistics cache using the CLI This procedure shows how to use CLI commands to clear the asymmetric traffic statistics. > [!WARNING] > Important > > To avoid depleting system resources and degrading appliance performance, enable this feature only while you are collecting and viewing the statistics needed to investigate asymmetric flows in the network. The Network Security appliance collects and displays statistics for SYN-only flows and non-SYN-only asymmetric flows separately. To conserve system resources, each list can store no more than 100 statistics. After a list is filled to capacity, the appliance stops collecting statistics for that type of flow. Statistics collection for the flow resumes after you refresh the cache. The refresh operation clears both lists even if only one of the lists is full. Enabling statistics collection also clears both lists. ### Prerequisites - Admin access to the Network Security appliance. **To refresh the asymmetric traffic statistics:** 1. Log in to the appliance CLI and go to configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Clear the asymmetric traffic flow statistics: ``` hostname (config) # smartvision event-track asym-flow refresh ```