--- title: "Remove the CA-signed certificate chain" slug: "remove-the-ca-signed-certificate-chain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:11Z published: 2026-10-05T15:41:11Z canonical: "docs.trellix.com/remove-the-ca-signed-certificate-chain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Remove the CA-signed certificate chain ## Before you begin You can remove the CA-signed certificate chain only if the following conditions are met: - You can remove the certificate chain for the Manager only if all the Sensors managed by the Manager is using self-signed certificate. - The active certificate should be changed to self-signed before removing the CA certificate from the Manager. To remove the certificate chain, perform the following steps: ## Task 1. To remove the certificate chain for the Manager, go to **Manager** → **** → **Setup** → **Certificates**. To remove the certificate chain for the Sensor, go to **Devices** → **** → **Devices** → **** → **Setup** → **Trust Certificates**. 2. In the **CA-Signed Certificate** section, click **Other Actions** → **Remove Certificate**. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-2816927D-E994-4279-8D98-0DCB52C425B5-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A26Z&se=2026-11-20T12%3A16%3A26Z&sr=c&sp=r&sig=u8lFTU9ZLnpsui2cSGqbMN%2F4HwMXDb%2FKbsTdAXpgdKc%3D) The CA-signed certificate chain will be removed from the Manager. > [!NOTE] > Note > > You must remove the CA-signed certificate chain separately for every Sensor and then have the trust reestablished with the Manager.