Perform this task if you want to remove the power supply from the Sensor.
Steps:
Unplug the power cable from its power source and remove the power cable from the power supply.
Push the release latch sideways toward the handle.
Center the handle of the power supply and pull on it to remove the power supply.
Use faceplate panels to protect unused slots from dust and to reduce electromagnetic radiation.
Replace the mounting bracket.
Caution
To avoid data interruption, do not turn off both power supplies on an in-line Sensor; or else the Sensor shuts down and all Sensor functions stop. Turn off only the power supply that you are replacing.
Note
To remove all power from the Sensor, unplug all power cords.