--- title: "Remove the power supply" slug: "remove-the-power-supply-3" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:52Z published: 2026-09-17T09:43:52Z canonical: "docs.trellix.com/remove-the-power-supply-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Remove the power supply Perform this task if you want to remove the power supply to the Sensor. **Steps:** 1. Unplug the power cable from its power source and remove the power cable from the power supply. 2. Push the release latch sideways toward the handle. 3. Center the handle of the power supply and pull on it to remove the power supply. 4. Use faceplate panels to protect unused slots from dust and to reduce electromagnetic radiation. 5. Replace the mounting bracket. > [!WARNING] > Caution > > To avoid data interruption, do not turn off both power supplies on an in-line Sensor; or else the Sensor shuts down and all Sensor function stops. Turn off only the power supply that you are replacing. > [!NOTE] > Note > > To remove all power from the Sensor, unplug all power cords.