--- title: "Removing and Replacing a Disk Drive" slug: "removing-and-replacing-a-disk-drive-5" updated: 2026-09-03T19:35:05Z published: 2026-09-03T19:35:05Z canonical: "docs.trellix.com/removing-and-replacing-a-disk-drive-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Removing and Replacing a Disk Drive Perform the following steps to remove and replace a disk drive: 1. Remove the bezel at the front of the appliance by sliding the release tab to the right and pulling the bezel away from the chassis. 2. Locate the disk drive carrier that contains the failed disk drive. The carrier should have a blinking amber LED. 3. Unlock the disk drive handle by sliding the blue tab to the left. 4. Push the maroon button on the right to release the latch handle. 5. Pull the handle to slide the disk drive from its slot. 6. Insert the new disk drive carrier into the available slot and push in until it clicks. :