--- title: "Removing licenses using the CLI" slug: "removing-licenses-using-the-cli-5" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-07T20:58:12Z published: 2026-09-07T20:58:12Z canonical: "docs.trellix.com/removing-licenses-using-the-cli-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Removing licenses using the CLI Use the CLI commands in this topic to remove licenses. **Prerequisites** - Admin or Operator access **To remove licenses:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. List the installed licenses: ``` hostname (config) # show licenses License 1: LK2-FIREEYE_APPLIANCE-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_APPLIANCE Description:         FireEye Appliance Valid:               yes Start date:          2016/11/01 (ok) Tied to appl ID:     000000000000 (ok) Product:             MPS (ok) Type:                PROD (ok) Agreement:           EULA (ok) Op Mode:             inline (ok) Active:              yes ... License 2: LK2-CONTENT_UPDATES-0000-0000-0000-0000-0000-0000-0000 Feature:             CONTENT_UPDATES Description:         Content updates Valid:               yes Start date:          2016/11/01 (ok) End date:            2017/11/01 (ok) Tied to appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes License 3: LK2-FIREEYE_SUPPORT-0000-0000-0000-0000-0000-0000-0000 Feature:             FIREEYE_SUPPORT Description:         FireEye Support Valid:               yes Start date:          2016/11/01 (ok) End date:            2017/11/01 (ok) Tied to appl ID:     000000000000 (ok) Sharing:             all (ok) Active:              yes ``` 3. Specify the license ID to remove an individual license. For example, is the license ID for the Support license shown in the previous example. ``` hostname (config) # license delete 3 ``` 4. Save your changes. ``` hostname (config) # write memory ``` > [!NOTE] > Note > > The `show licenses` command output in this procedure shows the basic licenses installed on a Network Security appliance. The output is similar for Malware Analysis appliances.