--- title: "Removing a managed appliance from the Central Management System network using the Web UI" slug: "removing-managed-appliance-central-management-system-web-ui-3" updated: 2026-08-25T21:18:33Z published: 2026-08-25T21:18:33Z canonical: "docs.trellix.com/removing-managed-appliance-central-management-system-web-ui-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Removing a managed appliance from the Central Management System network using the Web UI Use the **Sensors** page to remove an appliance from the Central Management System network. ![CM_RemoveFromCM_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72bafc49-ab46-a7ca-aa88-00da994ea1d7(1).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A36%3A17Z&se=2026-11-20T07%3A36%3A17Z&sr=c&sp=r&sig=8ubFbK2cP%2FwsvNr1NRrc8ZsSI%2FZzHtaYlHhGCwB1DKk%3D) ### Note The **Un-Enroll And Delete** link is used to remove a Network Security sensor from an IVX cluster and then remove it from the Central Management System appliance. For details, refer to the *Distributed Network Security IVX Smart Grid Guide* or the *Distributed Network Security Cloud MVX Guide*. To remove an appliance: 1. Click the **Appliances** tab. The **Sensors** tab should be selected. 2. Click **Select** > **Delete** in the row for the appliance you to want to remove. 3. If the Network Security sensor is enrolled with the MVX cluster, click **Un-Enroll And Delete** in the row for the sensor you want to remove. 4. When prompted, click **OK** to confirm your action. ### Note Removing an appliance can take a long time if the Central Management System appliance is busy aggregating data. :