--- title: "Renaming a Network Security HA pair using the CLI" slug: "renaming-a-network-security-ha-pair-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:32:10Z published: 2026-09-12T20:32:10Z canonical: "docs.trellix.com/renaming-a-network-security-ha-pair-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Renaming a Network Security HA pair using the CLI Use the commands in this section to rename a Network Security HA pair. To rename a Network Security HA pair: 1. Log in to the Central Management System CLI. 2. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal hostname (config) # ``` 3. Rename the HA pair: ``` hostname (config) # cmc ha nx rename ``` where `<existingName>` is the name you want to replace and `<newName>` is the new name for the pair. 4. Verify your change: ``` hostname (config) # show cmc ha nx ``` 5. Save your change: ``` hostname (config) # write memory ``` ###### Example The following example changes the name from "Acme_NXHA" to "Acme_NXHA_East". ``` hostname (config) cmc ha nx Acme_NXHA rename Acme_NXHA_East hostname (config) show cmc ha nx NX-HA Acme_NXHA_East: nx-1 nx-2      Status: OK    Comment:                          Eastern region pair    ... ``` :