--- title: "Replacing a member of a Network Security HA pair" slug: "replacing-a-member-of-a-network-security-ha-pair" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-10-01T14:09:29Z published: 2026-10-01T14:09:33Z canonical: "docs.trellix.com/replacing-a-member-of-a-network-security-ha-pair" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Replacing a member of a Network Security HA pair You can replace a member of an HA pair with another Network Security appliance. After you replace a member of the pair: - New alerts the replaced appliance generates are applied to the individual appliance. Alerts the replaced appliance generated while it was part of the pair remain associated with the pair. - New alerts the replacement appliance generates are applied to the pair. Alerts the replacement appliance generated before it was part of the pair remain associated with it as an individual appliance. For information about how the Central Management System appliance handles alert aggregation in related scenarios, see [Alert aggregation](/network-and-platform/docs/about-network-security-high-availability#configuration-replication). If you are replacing a defective appliance, see [Recovering malware-object events after a failure using the CLI](/network-and-platform/docs/recovering-malware-object-events-after-a-failure-using-the-cli) and [Replacing an HA member using an RMA](/network-and-platform/docs/replacing-a-network-security-ha-member-using-an-rma). ##### Prerequisites - Operator or Admin access :