--- title: "Requesting management by a Central Management System appliance" slug: "requesting-management-by-a-central-management-system-appliance-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-04T08:49:36Z published: 2026-09-07T20:56:20Z canonical: "docs.trellix.com/requesting-management-by-a-central-management-system-appliance-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Requesting management by a Central Management System appliance This section covers the following information: - [Preparing an appliance to send a management request](/network-and-platform/docs/preparing-an-appliance-to-send-a-management-request-4) - [Sending a management request using the Web UI](/network-and-platform/docs/sending-a-management-request-using-the-web-ui-3) - [Sending a management request using the CLI](/network-and-platform/docs/sending-a-management-request-using-the-cli-4) > [!NOTE] > Note > > You cannot use the Malware Analysis Web UI to send a management request to the Central Management System appliance. Instead, you must use the CLI. You can send a request to be added to the Central Management System appliance to be managed. A rendezvous process enables appliances to attempt the request and allows the Central Management System administrator to see the list of pending requests. > [!NOTE] > Note > > Before you attempt to use a Central Management System appliance to manage an AX appliance, be sure to complete the steps described in Integrating Central Management System appliances and Malware Analysis servers. To send a management request, you must enable the following: - Rendezvous process on the Central Management System appliance (enabled by default) - Automatic rendezvous attempts on the requesting appliance - Auto connect feature on the requesting appliance so it automatically tries to connect to the Central Management System appliance after the rendezvous attempt succeeds (enabled by default) Instructions for verifying and enabling these settings are included in the procedure [Preparing an Appliance to Send a Management Request](/network-and-platform/docs/preparing-an-appliance-to-send-a-management-request-4) . > [!WARNING] > Caution > > The rendezvous process has an identifier (known as *service name*) that is set to "cmc" by default. The Central Management System appliance and the requesting appliance must have the same service name; if you change the service name on one, you must change it on the other as well. The `cmc rendezvous service-name <hostname>` command changes the service name; the `no cmc rendezvous service-name` command restores the default value. For details, see the CLI Command Reference. > [!NOTE] > Note > > See [Sending a management request in a NAT deployment](/network-and-platform/docs/sending-a-management-request-in-a-nat-deployment-4) for procedures to follow in a Network Address Translation (NAT) deployment.