--- title: "Reservoir Labs R-Scope configuration" slug: "reservoir-labs-r-scope-configuration-1" tags: ["Reference", "Helix Enterprise", "Sec Ops and Analytics"] updated: 2026-09-05T14:07:16Z published: 2026-09-05T14:07:16Z canonical: "docs.trellix.com/reservoir-labs-r-scope-configuration-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reservoir Labs R-Scope configuration Use these instructions to configure Reservoir Labs R-Scope to output syslog data to Helix Enterprise. Prerequisite - You must have Administrator access. To configure Reservoir Labs R-Scope for Helix Enterprise and your environment: 1. Log in as admin and enter the following command: ``` logs export syslog dest add ``` 2. Enter a unique identifier for the log destination. 3. Enter the IP address of the destination for your log. 4. Enter the port number. 5. Choose a transport protocol: enter **1** for TCP or **2** for UDP. 6. Press **q** to exit.