--- title: "Reset the password and all the parameters to factory default" slug: "reset-the-password-and-all-the-parameters-to-factory-default" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/reset-the-password-and-all-the-parameters-to-factory-default" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Reset the password and all the parameters to factory default If you have forgotten the password and do not know the correct password in the login prompt, perform the following steps to reset the password and all the other parameters of the Active Fail-Open kit. **Steps:** 1. On the fail-open switch, press the **PB0** push button for three seconds to enter the main menu seen in the display panel. ![GUID-E2B9680C-E6CD-4890-8A33-38FC81A3FC03-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72b32a9b-e152-c4d8-584e-2dbe9274a1aa(1).png?sv=2026-02-06&spr=https&st=2026-11-20T18%3A09%3A24Z&se=2026-11-20T19%3A09%3A24Z&sr=c&sp=r&sig=YZnmuC5IHhpEltpHT9Blb9ysBiaKj76mFLydW1%2F6Gb4%3D) 2. Do a short press on the **PB0** push button to move to the next submenu in the list. Perform this step till you move to the `OP` submenu. 3. Push the **PB1** push button with a short press to select and view the options in the `OP` submenu. 4. Do a short press on the **PB0** push button to move to the next option in the `OP` submenu. Perform this step till you move to the `DEFAULT` option. 5. Push the **PB1** push button with a short press to select the `DEFAULT` option. **Result:** When the option `DEFAULT` is selected, it sets the default factory parameters. In the display panel, you can view small lines ( _ _ _ _ _ ) which indicates that default factory parameters are successfully set. As a result, the password is also reset to the default password.