--- title: "resetconfig" slug: "resetconfig-2" tags: ["Certification", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/resetconfig-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # resetconfig This command resets all configuration values to their default values. It deletes or resets values as described below. This command causes an automatic reboot of the Sensor. | **Deleted Values** | **Values Reset to Defaults** | | --- | --- | | - Manager IP addresses (and secondary interface's IP address, if configured). This can be IPv4 or IPv6 address. | - Monitoring and Response port settings | | - Certificates establishing trust between Sensor and Manager | - Management port settings | | - Shared secret key | - Manager Install port value | | - Signatures | - Manager Alert port value | | - TFTP server IP address (IPv4 or IPv6 address) | - Manager Log port value | | - SCP server IP address (IPv4 or IPv6 address) | | | - DoS profile files (learned DoS behavior) | | | - SSL Keys | | | - Exception Object | | | - ACL | | | - Advanced Setting | | | - SSH Host Public/Private Key (Client/Server) | | | - SSH Session Key | | | - Administrator Passwords | | | - Sensor User Passwords (Users created by admin using “adduser” CLI) | | | - 3rd Party SNMP Client Privacy and Authentication Keys | | | - Manager SNMP Client Privacy and Authentication Keys | | On executing the command, the following messages are displayed: `Reset other configurations and reboot? Please enter Y to confirm: Y` > [!NOTE] > Note > > If you enter **Y**, the Manager-Sensor trust is removed. If you enter **N**, the Manager-Sensor trust remains intact and you come out of the deinstall prompt. Pressing **Y** displays the following message: `resetting the configuration and rebooting the sensor` On executing the command, the following messages are displayed if the CA signed certificate is present: `CA cert detected, will be deleted on resetconfig` `reset the configuration and reboot the sensor? Please enter Y to confirm: Y` Entering **Y** displays the following message: `resetting the configuration and rebooting the sensor` **Syntax**: `resetconfig`