--- title: "Resolved issues" slug: "resolved-issues-24" tags: ["Release Notes", "IPS 11.1.x"] updated: 2026-10-01T07:58:57Z published: 2026-10-01T07:58:57Z canonical: "docs.trellix.com/resolved-issues-24" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Resolved issues The current release of the product resolves these issues. For a list of issues fixed in earlier releases, see the Release Notes for the specific release. For a list of current known issues, see: Trellix IPS 11.1 Known Issues [(KB96274)](https://support.trellix.com/s/article/KB96274). ### Resolved Manager software issues The following table lists the **high-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-27034 | Scheduled automatic backups do not get stored after upgrading to Manager version 10.1.7.65 or later. | | NSPMGR-27023 | Sensors cannot connect to Managers in MDR pairs on port 8502 after upgrading to Manager version 11.1.7.26 and Sensor version 11.1.5.22, when more than 10 Sensors have been upgraded at a time. | The following table lists the **medium-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-27020 | The **Throughput** tab of the **Devices** → **** → **Devices** → **Device Name** → **Troubleshooting** → **Performance Charts** page does not show any data after upgrading to Manager version 11.1.7.26 and Sensor version 11.1.5.22. | | NSPMGR-22995 | The **Devices** → **** → **Global** → **Sensor Health** → **Health Status** page and **Analysis** → **** → **MITRE ATTACK View** page do not show any information when **Logon Control** option is enabled in the Manager. | | NSPMGR-22985 | After SSL certificate is renewed, the certification renewal information is not displayed on the **Devices** → **** → **Global** → **IPS Device Settings** → **SSL Decryption** → **Outbound** → **Re-Signing Certificate** tab in the Manager. | | NSPMGR-22902 | Controller **Instance ID** is shown as "---" on the **vIPS Contollers** tab of the **Devices** → **** → **Global** → **Device Manager** page. | | NSPMGR-22870 | The **Capture Packets** column shows **Post-Attack** after disabling post-attack capture packets option for any attack on the **Attack Definitions** tab of the **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS** page. | | NSPMGR-22775 | Unable to move to the **Archival** → **Alert Restore** tab in the dbadmin.bat tool. | | NSPMGR-22773 | When NS3100 standalone/HA pair is added to the Manager, the **Devices** → **** → **Global** → **Device Manager** page repetitively shows **Sync required** for SSL key change even when inbound SSL decryption is enabled at Global level and changes are deployed at the device level. | | NSPMGR-22728 | User assigned with **Security Expert** role is unable to view the configuration details in **Manager** → **** → **Setup** → **MDR** in the Primary Manager. | | NSPMGR-22716 | Trellix IPS Manager icon does not appear in Windows system tray after the installation of Manager version 10.1.7.65 or later. | | NSPMGR-22704 | When the integration with Multi-Vector Virtual Execution (MVX) engine is enabled, the status of malware samples submitted to MVX for analysis shows as Pending under **Trellix Cloud** column instead of **MVX** column in the **Analysis** → **Malware files** page. | | NSPMGR-22677 | Clicking **Clear All Filters** button does not completely remove all applied filters while editing any attack policy on the **Attack Definitions** tab of the **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS** page. | | NSPMGR-22675 | ATLVReader.bat file is not able to process TLV dump and provide output. | | NSPMGR-22643 | The **Analysis** → **** → **Attack Log** page does not automatically fetch the latest alerts when the **Automatic Refresh** option is enabled. | | NSPMGR-22582 | The movement of 1000 entries from Allow list to Block list and vice versa takes more than 5 minutes. | | NSPMGR-22151 | While syncing with the Central Manager, the **Alert Sets** configured does not filter alerts as expected in the Manager MDR pair setup. | The following table lists the **low-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-22984 | The **Last Updated** column on the **Attack Definitions** tab of **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS** → **Master Attack Repository** policy set does not show the latest signature sets on top when sorted by descending order. | | NSPMGR-22708 | The `system config backup` command fails to run after upgrading to Linux-based Manager version 10.1.7.40 or later. | ### Resolved Sensor software issues The following table lists the **high-severity** Sensor software issues: | Reference # | Resolution | | --- | --- | | NSPSNSR-14928 | Filesystem partition becomes Read-Only in certain scenarios as a result of race conditions in writing data to files in the absence of journaling. The partition becoming read-only causes symptoms such as signature file push failures. | | NSPSNSR-14450 | SSL inspection causes latency with TLS 1.3 traffic. | | NSPSNSR-13466 | SSL inspection causes latency when decryption happens over SSL resumption sessions with ciphers, such as Diffie Helman, on condition where the Sensor holds the packets in queue on error. | | NSPSNSR-13461 | [NS9100, NS9200, NS9300] BPDU packets are dropped at port pairs on the G3 module. | The following table lists the **medium-severity** Sensor software issues: | Reference # | Resolution | | --- | --- | | NSPSNSR-14807 | The Sensor reboots on watchdog expiry which was expecting one of the log files to be present on the Sensor. | | NSPSNSR-13185 | The `userlist` command displays same user 4 times in the output after the user is assigned a role. | | NSPSNSR-12436 | No fault message is logged at the Sensor and Manager despite disconnecting the power cable. |