--- title: "Resolved issues" slug: "resolved-issues-50" tags: ["Release Notes", "IPS 11.1.x"] updated: 2026-10-01T07:59:03Z published: 2026-10-01T07:59:03Z canonical: "docs.trellix.com/resolved-issues-50" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Resolved issues The current release of the product resolves these issues. For a list of issues fixed in earlier releases, see the Release Notes for the specific release. For a list of current known issues, see: Trellix IPS 11.1 Known Issues [(KB96274)](https://support.trellix.com/s/article/KB96274). ### Resolved Manager software issues The following table lists the **high-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-28789 | Attack set profiles cannot be deleted after upgrading Linux-based Manager to software version 11.1.7.111. | The following table lists the **medium-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-29215 | VLAN bridging feature doesn't work in NS9500 stack setup. | | NSPMGR-29113 | After the upgrade to Manager version to 11.1.7.97 and Sensor version to 11.1.5.98, when DNS configuration is disabled on the Sensor, multiple **GTI: Risky URL Detected** alerts get triggered. | | NSPMGR-28776 | RSA 4096-bit key CA-signed certificates are not visible on the **GUI Certificates** tab of the **Manager** → **** → **Setup** → **Certificates** page after upgrading to Manager version 11.1.7.111. | | NSPMGR-28765 | Secondary Manager's GUI certificate is copied to Primary Manager after a force switch over, even though the **Copy Certificate** option was disabled during the MDR pair configuration. | | NSPMGR-28738 | Unable to generate IPS Sensor Configuration Report in the Manager. | | NSPMGR-28592 | **Attack Category** drop-down appears blank when **IPS Events** is selected as **Report Category** and **User defined** as **Report Type** during the configuration of **Automation Settings** in the **Manager** → **** → **Reporting** → **Report Automation** page. | | NSPMGR-28575 | Error is displayed in the Manager when rule object count of more than 140,000 members is configured in NS9600 Sensor. | | NSPMGR-28562 | Managers in MDR pair with large scale pending event syncs (alert and packet logs) occasionally might show high CPU utilization. | | NSPMGR-28553 | **IP: Connection Limiting Rule Match** alert details In Manager show **Observed Value** instead of **Exceeded Connection Count** when the pre-configured threshold value is reached. | | NSPMGR-28543 | In a few cases, the **Quarantine** option is displayed for configuration in Sensor response actions in IPS policy for SmartVision attacks in Manager version 11.1.7.111 after an upgrade. | | NSPMGR-28407 | Integration with Trellix Network Investigator (NI) is not inherited into the Sensor(s) in the child domain by default. | | NSPMGR-28074 | Reconnaissance Policy cannot be enabled when updating IPS policy via API in the Manager. | | NSPMGR-12094 | Customized user roles need to be re-assigned after a major version upgrade of IPS Manager. | The following table lists the **low-severity** Manager software issues: | Reference # | Resolution | | --- | --- | | NSPMGR-27111 | User assigned with a role excluding **Guest Portal User Account Manager**, **User Auditing**, and **View Packet Captures** privileges, is able to perform the same operations as Super User. | ### Resolved Sensor software issues The following table lists the **high-severity** Sensor software issues: | Reference # | Resolution | | --- | --- | | NSPSNSR-16499 | Automatic GAM update fails and GAM engine status changes to uninitialized state due to FQDN change after sensor software upgrade or after executing `reset-gam-update` command on Sensor CLI. | | NSPSNSR-16369 | SNMP process crash is observed after sensor software upgrade resulting in sensor getting disconnected from Manager. | | NSPSNSR-16203 | Spike in flow pool memory causes 100% memory usage in Sensors after upgrading to Sensor version 11.1.5.84 or higher. | The following table lists the **medium-severity** Sensor software issues: | Reference # | Resolution | | --- | --- | | NSPSNSR-16497 | Sensor crash is observed when aid logging is enabled for system event based attacks. | | NSPSNSR-16462 | Extra random character shows up at the end of the domain name when C&C Server Domain Name alert is generated. | | NSPSNSR-16334 | Sensor incorrectly raises the fault **Device voltage is outside its normal range** after upgrading to version 11.1.5.84. | | NSPSNSR-16333 | Sensor health moves between good and abnormal status due to incorrect reporting of PSU temperature. | | NSPSNSR-16217 | [NS9300] The G3 and G7 interface module LEDs do not turn on after upgrading Sensors to version 11.1.5.98. | | NSPSNSR-16212 | Once Sensor is upgraded to 11.1.5.84 version, it gets into uninitialized state if **Application Identification** feature is disabled. | | NSPSNSR-16068 | Packet buffer memory usage values differ between the **Performance Charts** page of the Manager and CLI output (**show mem-usage**) on the Sensor. | | NSPSNSR-16057 | Similar Domain names differing in case (block letters or small) were not handled resulting in false positive alerts for **Advanced Callback Detection** feature. | | NSPSNSR-14401 | SSL Proxy decryption doesn't work when VRRP's virtual IP address is used as default gateway on the client machine, making web application inaccessible. |