Resolved issues

COM-12986

New logs could not be generated due to the Log Manager Create button being disabled and the progress showed "Archive being created". The issues are resolved.

COM-23960

The physical disk serial number did not match the output of show media disk. This issue is resolved.

COM-29773

Upgrading previously created certs under FireEye org name is not supported.

COM-29806

Power supply failure alert notifications were created unnecessarily in the following models: NX 3500, NX 4500, NX 5500. This issue is resolved

COM-29863

Apache has been upgraded to overcome the vulnerability described in IAVM 2022-A-0124.

COM-29874

Vulnerabilities CVE-2022-22965, CVE-2022-22963, and CVE-2022-22950 are resolved.

COM-29002

The show log continuous command was not generating the expected output. The issue is resolved.

COM-29377

The Velocity Engine has been upgraded to address the Velocity Sandbox Bypass issue (CVE-2020-13936).

COM-29624

Some appliances could not connect to HelixConnect. This issue is resolved.

COM-29702

CEF logs did not have the cs6 field extension. This issue is resolved.

COM-30030

Alert notifications and alert logs were delayed when many detections occurred simultaneously. This issue is resolved.

COM-30031

The Apache vulnerability described in IAVM 2022-A-0230 has been addressed.

COM-30144

The SMTP alerts using TLS failed to authenticate if the password contained a # character. This issue is resolved.

COM-30244

mgmtd could not be recovered if a failure occurred. The issue is resolved. mgmtd can now be recovered by rebooting the system after a failure.

COM-30325

SNMP settings used to reset to default values on reloading the site or logging out. The issue is resolved.

COM-30344

TLS version 1.1 was not secure enough in compliance mode for CC-NDcPP 2022 certification. The issue is resolved. TLS is upgraded to version 1.2.

COM-30537

CVE-2021-46848 vulnerability has been addressed.

COM-30604

Delimiter between multiple SSH Allow users was not effective. The issue was resolved.

COM-30641

The full file path was included in the "filename" field in the metadata that was sent to cloud.fireeye.com. This issue has been resolved.

COM-30743

License update was producing the error message, "Internal error fetching licenses". The issue is resolved.

COM-30788

You can now view datastreaming logs from the CLI using the show datastreaming log command.

COM-30894

Issues of generating empty static reports have been fixed.

COM-30935

SNMPv3 allowed the creation of a user with an invalid SNMP key. This issue is resolved.

COM-30950

The original file names were being truncated in the malware analysis table during local and remote transfer. The issue is resolved.

COM-31007

Apache has been upgraded to overcome the vulnerability described in CVE-2023-24998.

COM-31187

Advanced URL Defense reported an error on the sensor appliance. The issue is resolved.

WEBMPS-21636

Issues related to backup, restore and reset factory settings for IPS services are resolved.

WEBMPS-21803

The NX 6500 appliance showed incorrect Warning and Critical values for Maximum bandwidth in both the CLI and the Web UI. The issues are resolved.

WEBMPS-24145

WEBMPS-24841

Security Content update failure did not trigger an SNMP trap. The issue is resolved.

WEBMPS-24321

System Load and other services were generating false health alerts. The issues are resolved.

WEBMPS-24531

ifName was not included in the interface-up / interface-down SNMP trap. This issue is resolved.

WEBMPS-24836

The Network Security appliance could not cancel an active packet capture service. The issue is resolved.

WEBMPS-24884

Source and destination IP addresses appeared interchanged on the Alert Details page and in XML and CSV files. The issue is resolved.

WEBMPS-25062

An issue created by the escape characters '\/\/' in urllist.txt is resolved.

WEBMPS-25104

Riskware alert severity was displayed as N/A on the Web UI Dashboard. This issue is resolved.

WEBMPS-25170

The Network Security appliance in L3 mode was sending reset packets while the port-pairs were in TAP mode. This issue is resolved

WEBMPS-25195

Inconsistencies in alerts from the Network Security appliance and Helix are resolved.

WEBMPS-25426

250-****STARTTLS response instead of 250-STARTTLS was not accepted on the Network Security appliance. This issue has been resolved.

WEBMPS-25615

Proxy details were missing in the riskware alert notification. The issue is resolved.

WEBMPS-25679

The Network Security appliance was receiving empty IP address on configuring drop out-interface. The issue is resolved. You need to execute policymgr interface re-configure CLI command after configuring any policymgr interface commands.

WEBMPS-25806

A database corruption event created multiple issues on the Network Security 1500 appliance. These issues are resolved.

WEBMPS-26034

Change in timezone was not being honoured by the Service Health Digest notification. This issue is resolved

WEBMPS-26238

IPS custom rule validation failed for rules with UDP protocol and the TCP flags option. This issue is resolved.

WEBMPS-26249

'Backup Reserve/free spaces is too low' error was logged when generating a backup config+fedb even though disk space is enough to store more backups. This issue is resolved.

WEBMPS-26413

The disk space under /var/root/tmp/sa_python was full. The issue is resolved.

WEBMPS-26418

SSL connection was timing out due to delayed SYN ACK on the Network Security appliance. The issue is resolved.

WEBMPS-26426

Inconsistency in ICAP blocking is resolved.

WEBMPS-26439

Issues arising due to a TCP evasion technique are resolved. The evasion technique works by overlapping a TCP segment with a fake packet.

WEBUI-14724

Naming a custom dashboard using non-ASCII and hyphen characters failed on the Web UI with the following error message: "Please enter a valid name". This issue is resolved.

WEBUI-14821

When an IPS event was clicked on the Web UI, the page did not respond. IPS performance improvement has fixed this issue.