--- title: "Restoring automatic node enrollment" slug: "restoring-automatic-node-enrollment" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/restoring-automatic-node-enrollment" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Restoring automatic node enrollment The enrollment service on a node must be enabled so it can receive submissions from the sensor or hybrid appliance, and is enabled by default. Use the procedures in this section to re-enable the enrollment service after it is disabled. > [!NOTE] > Note > > The `no mvx cluster enrollment-service client enable` command disables automatic enrollment. Use this command only with guidance from Trellix Technical Support. ##### To enable the enrollment service: 1. Log in to the Virtual Execution CLI. 2. Enable the CLI configuration mode: ``` vx-hostname > enable vx-hostname # configure terminal ``` 3. Enable the enrollment service: ``` vx-hostname (config) # mvx cluster enrollment-service client enable ``` 4. Verify your change: ``` vx-hostname (config) # show mvx cluster enrollment status ``` 5. Save your change: ``` vx-hostname (config) # write memory ``` **Example** The following example re-enables the enrollment service on the vx-2 node. ``` vx-2 (config) # mvx cluster enrollment-service client enable vx-2 (config) # show mvx cluster enrollment status    Enrollment Client :        Status ok                 : yes        Status description        : Ok        Last checked at           : 2019/07/21 00:34:01    Enrollment Service :        Auto enabled              : yes        Service address           : CMS (DTIUser@10.11.121.13 : singleport)        Preferred cluster         :        Cluster Name               : Cluster-Acme        Broker Name                : vx-1 (self)        Broker ID                  : 002XXXXXXXXX (self)        Broker Address             : 10.11.121.12 (self)        Broker State               : N/A        Failure Reason             : N/A        Last Connection Attempt    : N/A        Connection Last Formed     : N/A        Connection Last Broken     : N/A ```