--- title: "Restoring automatic sensor enrollment" slug: "restoring-automatic-sensor-enrollment" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/restoring-automatic-sensor-enrollment" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Restoring automatic sensor enrollment The enrollment service on a sensor or hybrid appliance must be enabled so it can submit objects to the cluster, and is enabled by default. Use the procedures in this section if you need to restore automatic enrollment after it is disabled. > [!NOTE] > Note > > The `no mvx cluster enrollment-service client enable` command disables automatic enrollment. Use this command only with guidance from IVX Technical Support. ##### To restore automatic enrollment: 1. Log in to the sensor or hybrid appliance CLI. 2. Enable the CLI configuration mode: ``` appl-hostname > enable appl-hostname # configure terminal ``` 3. Restore automatic enrollment: ``` appl-hostname (config) # mvx cluster enrollment-service client enable ``` 4. Verify your change: ``` appl-hostname (config) # show mvx cluster enrollment status ``` 5. Save your change: ``` appl-hostname (config) # write memory ``` **Example** The following example restores automatic enrollment on the nx-1 sensor. ``` nx-1 (config) # mvx cluster enrollment-service client enable nx-1 (config) # show mvx cluster enrollment status MVX Cluster Enrollment Status    Enrollment Client :        Status ok                  : yes        Status description         : enrolled        Last checked at            : 2019/08/25 18:05:25    Enrollment Service :        Auto enabled               : yes        Service address            : CMS (DTIUser@10.11.121.13 : singleport)        Preferred cluster          : any (less loaded)        Cloud enabled              : no        Cloud License enabled      : no        Connect on demand          : no    Broker Info :        Cluster Name               : Cluster-Acme        Broker Name                : vx-1        Broker ID                  : 002XXXXXXXXX        Broker Address             : 10.11.121.12        Broker State               : Connected        Failure Reason             : None        Last Connection Attempt    : 2019/08/21 00:15:46        Connection Last Formed     : 2019/08/21 00:15:47        Connection Last Broken     : ```