--- title: "Restoring the database from a backup file" slug: "restoring-the-database-from-a-backup-file-7" tags: ["Malware Analysis (AX)", "AX 10.x", "Product Usage"] updated: 2026-09-07T20:43:20Z published: 2026-09-07T21:08:04Z canonical: "docs.trellix.com/restoring-the-database-from-a-backup-file-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Restoring the database from a backup file You can restore the backup from three locations: - From your local appliance. - From a remote server. Do not restore the current network settings while the appliance is performing a restore operation from a remote server. - From a USB device connected to your local machine. ### Note You can also restore a backup database belonging to a different appliance model that uses the same build. This feature is useful when you upgrade from one appliance model to another. ### Usage guidelines Follow these usage guidelines when you are restoring the database from a backup file: - The appliance will not be fully operational during the restore operation. For example, the alert detection process will stop during the restore operation. - You cannot cancel the restore operation while it is in process. - If the restore process fails, you can revert the appliance back to the factory-installed defaults. If you are restoring only the configuration database, the appliance will automatically revert back to the original configuration. - Only the config, config+fedb, and fedb backup profiles can be restored from a software upgrade. You cannot restore the backup from a software downgrade. - You cannot restore a backup from another product family. - You cannot restore a backup from a release earlier than Malware Analysis 7.7.0. Prerequisites - Admin access - Verify that you have a backup FEBKP file of the current database before you begin the restore operation. - Locate the previous backup you want to restore. - Verify the details for the appliance, backup profile, version, hostname, and date stamp. These details are validated while the restore operation is in process. :