--- title: "Running Intelligent Virtual Execution - Server CLI commands from the Central Management System CLI" slug: "running-intelligent-virtual-execution-server-cli-commands-central-management" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-25T14:20:00Z published: 2026-08-25T14:20:00Z canonical: "docs.trellix.com/running-intelligent-virtual-execution-server-cli-commands-central-management" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Running Intelligent Virtual Execution - Server CLI commands from the Central Management System CLI Trellix recommends that, after you have completed initial configuration of the Intelligent Virtual Execution - Server appliances and are managing them from one or more Central Management System appliances, you configure the managed Intelligent Virtual Execution - Server appliances using the Central Management System appliance. Initial configuration tasks for the Intelligent Virtual Execution - Server appliance are covered in [Initial configuration](/network-and-platform/docs/initial-configuration-1) . Trellix also recommends that you configure the managed Intelligent Virtual Execution - Server appliances using the Central Management System Web UI whenever possible, rather than the Central Management System CLI or the Intelligent Virtual Execution - Server CLI. Certain Intelligent Virtual Execution - Server appliance functions, however, can be configured from the Intelligent Virtual Execution - Server CLI only. > [!WARNING] > Important > > When you need to use CLI commands to configure a setting on a Intelligent Virtual Execution - Server appliance, enter the commands on the managing Central Management System appliance. Use one of the following configuration commands, where `<vxCommand>` is the CLI command you want to apply to the Intelligent Virtual Execution - Server appliance: > > - `cmc execute group sysgroup.<groupName> command "<vxCommand>"` > - `cmc execute appliance <nodeName> command "<vxCommand>"` > > The first command configures the setting on a group of appliances. The second command configures the setting on an individual appliance.