--- title: "Scenario 1: Inspection of traffic between virtual machines in SPAN mode" slug: "scenario-1-inspection-of-traffic-between-virtual-machines-in-span-mode-2" tags: ["Product Usage", "vIPS 11.1x", "vIPS"] updated: 2026-09-11T20:53:29Z published: 2026-09-11T20:53:29Z canonical: "docs.trellix.com/scenario-1-inspection-of-traffic-between-virtual-machines-in-span-mode-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Scenario 1: Inspection of traffic between virtual machines in SPAN mode This scenario involves using a SPAN monitoring port to inspect traffic between virtual machines on the same ESX. Similar to the SPAN mode deployment of a physical Sensor, the SPAN mode deployment of a Virtual IPS Sensor is also simple and non-intrusive. ### Scenario description before Virtual IPS Sensor deployment - The servers are installed on guest VMs on the ESX. - These servers are connected to a standard vSwitch — *vSwitch0*. - vSwitch0 has a physical adapter, which is connected to networks outside the ESX. Scenario before Virtual IPS Sensor deployment![Scenario before Virtual IPS Sensor deployment](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-38ddd684-97a2-1a8d-0d64-fae619bf14f2.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A40%3A15Z&se=2026-11-20T08%3A40%3A15Z&sr=c&sp=r&sig=Kl8sE506I4PmiTJ%2FuNYNAtMpkoB8vj8nEaEKTU%2FzDn4%3D) ### Scenario description after Virtual IPS Sensor deployment - Create a new switch port group set in promiscuous mode In vSwitch0. - The Virtual IPS Sensor is deployed on the ESX. - Consider that the Manager is installed on a VM connected to vSwitch1. - In this scenario, the Manager is connected to the management port of the Virtual IPS Sensor through vSwitch1. This vSwitch1 has a physical adapter vminc1. So, you can access the Manager and the Sensor from outside the ESX. - Monitoring port 1 of the Virtual IPS Sensor is in SPAN mode. This is connected to the promiscuous switch port group in vSwitch0. Therefore, a copy of all the packets of vSwitch0 are sent to port 1 for intrusion detection. Scenario after Virtual IPS Sensor deployment![Scenario after Virtual IPS Sensor deployment](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1e8685ae-7df6-af83-cbf8-a7979a547244.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A40%3A15Z&se=2026-11-20T08%3A40%3A15Z&sr=c&sp=r&sig=Kl8sE506I4PmiTJ%2FuNYNAtMpkoB8vj8nEaEKTU%2FzDn4%3D)