--- title: "Scenario 3: High-level steps for Virtual Sensor deployment" slug: "scenario-3-high-level-steps-for-virtual-sensor-deployment-3" tags: ["Product Usage"] updated: 2026-11-19T12:30:59Z published: 2026-11-19T12:30:59Z canonical: "docs.trellix.com/scenario-3-high-level-steps-for-virtual-sensor-deployment-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Scenario 3: High-level steps for Virtual Sensor deployment This section assumes the following for deploying the Virtual Sensor for scenario 3. - The ESX server meets the requirements as discussed in [Requirements for deploying the Virtual Sensor](/network-and-platform/docs/requirements-for-deploying-virtual-sensors-3). - You have the privileges on the ESX server to add and modify vSwitches and port groups. - You have installed the Virtual Sensor and established trust with the Manager successfully. As an example in this scenario, the management port is connected to vSwitch2. - As an example, this section uses the IPS-VM5000 Virtual Sensor to explain the deployment. - This scenario involves only a Sensor monitoring port pair deployed in inline fail-closed mode. - This section uses only the vSphere Client for configurations on the ESX. **Steps:** 1. Create a standard vSwitch for connecting Sensor monitoring port 2 with the external network through vmnic0. For this scenario, consider it is vSwitch1. Refer to the section [Create a standard vSwitch for a monitoring port](/network-and-platform/docs/create-a-standard-vswitch-for-a-monitoring-port-3). Make sure this vSwitch has a physical adapter and that this is connected to the corresponding external switch. 2. Modify vSwitch0 to connect monitoring port 1 and the virtual servers. For this scenario, you need not change the switch port group for the virtual servers. Create a new switch port group for monitoring port 1. Refer to the section [Modify an existing standard vSwitch for a monitoring port](/network-and-platform/docs/modify-an-existing-standard-vswitch-for-a-monitoring-port-3). 3. Assign the corresponding switch port group (promiscuous mode) to the monitoring ports. See the section [Specify the switch port groups for monitoring ports](/network-and-platform/docs/specify-the-switch-port-groups-for-monitoring-ports-3). - The switch port group that you created in step 1 (vSwitch1) must be assigned to monitoring port 2. - The switch port group that you created in step 2 (vSwitch0) must be assigned to monitoring port 1. 4. Verify if you have deployed the Virtual Sensor correctly and whether it is inspecting traffic. Refer to the section [Verify the deployment](/network-and-platform/docs/verify-the-deployment-3).