--- title: "Scenario 6 - Homogeneous, MDR setup" slug: "scenario-6-homogeneous-mdr-setup" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:35:43Z published: 2026-09-23T09:35:43Z canonical: "docs.trellix.com/scenario-6-homogeneous-mdr-setup" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Scenario 6 - Homogeneous, MDR setup This scenario is about an upgrade from a homogeneous Sensor environment to a heterogeneous Sensor environment in 10.1, managed by an MDR pair of Managers. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-807523A9-8146-446C-9A4C-8900C6919FAD-low.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A19%3A15Z&se=2026-11-20T04%3A19%3A15Z&sr=c&sp=r&sig=4%2FKZfN85PvQEJY4Oov7txcQehOsHNOuinDAz5ZlQ2Tg%3D) The upgrade path for this scenario is as follows: 1. Make sure that Managers and Sensors meet the minimum required versions to upgrade to the latest 10.1 version. If not, make sure that you upgrade them to the required versions before you begin your 10.1 version. 2. Make sure your current Trellix IPS deployment is functioning as configured and without any issues. 3. Upgrade the Manager MDR pair to the latest 10.1 version. See [Upgrading the Manager](/network-and-platform/docs/how-to-upgrade-the-manager). 4. Upgrade the required Sensors to the latest 10.1 version. See [Performing Signature Set and Sensor Software upgrade](/network-and-platform/docs/how-to-perform-signature-set-and-sensor-software-upgrade). ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-F9E4EFD2-95D7-4E2A-BD64-C0626E81D855-low.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A19%3A15Z&se=2026-11-20T04%3A19%3A15Z&sr=c&sp=r&sig=4%2FKZfN85PvQEJY4Oov7txcQehOsHNOuinDAz5ZlQ2Tg%3D)