--- title: "Scenario 7 - Heterogeneous, standalone setup" slug: "scenario-7-heterogeneous-standalone-setup" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:35:43Z published: 2026-09-23T09:35:43Z canonical: "docs.trellix.com/scenario-7-heterogeneous-standalone-setup" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Scenario 7 - Heterogeneous, standalone setup This section describes the upgrade for a heterogeneous Sensor environment managed by a standalone Manager. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-55D11CF8-6FE9-4D1F-929D-E805691FC635-low.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A13%3A09Z&se=2026-11-20T04%3A13%3A09Z&sr=c&sp=r&sig=AiwRQ8cJNTraiDOeZwbiDJVR7q9YMNjax10C8%2F01iLc%3D) The upgrade path for this scenario is as follows: 1. Make sure the Manager and Sensors meet the minimum required versions to upgrade to the latest 10.1 version. If not, make sure you upgrade them to the required versions before you begin your 10.1 version. 2. Make sure your current Trellix IPS deployment is functioning as configured and without any issues. 3. Upgrade the standalone Manager to the latest 10.1 version. See [Upgrading the Manager](/network-and-platform/docs/how-to-upgrade-the-manager). 4. Upgrade the required Sensors to the latest 10.1 version. See [Performing Signature Set and Sensor Software upgrade](/network-and-platform/docs/how-to-perform-signature-set-and-sensor-software-upgrade). ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-254C3E94-118D-44AD-A63F-C4EDAF157390-low.png?sv=2026-02-06&spr=https&st=2026-11-20T03%3A13%3A09Z&se=2026-11-20T04%3A13%3A09Z&sr=c&sp=r&sig=AiwRQ8cJNTraiDOeZwbiDJVR7q9YMNjax10C8%2F01iLc%3D)