--- title: "Scenario 8 – Heterogeneous MDR" slug: "scenario-8-heterogeneous-mdr-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:54:06Z published: 2026-11-19T12:54:06Z canonical: "docs.trellix.com/scenario-8-heterogeneous-mdr-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Scenario 8 – Heterogeneous MDR This section describes the upgrade for a heterogeneous Sensor environment managed by an MDR pair of Managers. ![GUID-EAF7FFD1-F062-4A55-AA83-9D588DB37D77-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e0b1074a-3109-83d0-2839-0b95aa9c0be8.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A54%3A11Z&se=2026-11-20T07%3A54%3A11Z&sr=c&sp=r&sig=MeMbvhN4Po%2BF2KUNDCl7jRlZLOhUiUR0GCmxJxcexmU%3D) The upgrade path for this scenario is as follows: 1. Make sure Managers and Sensors meet the minimum required versions to upgrade to the latest 11.1 version. If not, make sure you upgrade them to the required versions before you begin your 11.1 version. 2. Make sure your current Trellix IPS deployment is functioning as configured and without any issues. 3. Upgrade the Manager MDR pair to the latest 11.1 version. See [Upgrading the Manager](/network-and-platform/docs/how-to-upgrade-the-manager-2). 4. Upgrade the required Sensors to the latest 11.1 version. See [Performing Signature Set and Sensor Software upgrade](/network-and-platform/docs/how-to-perform-signature-set-and-sensor-software-upgrade-2). ![GUID-8F7FFFAE-1191-40E5-968D-56812862ADEA-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f09f03eb-b61f-310f-07b5-58536cb60fa3.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A54%3A11Z&se=2026-11-20T07%3A54%3A11Z&sr=c&sp=r&sig=MeMbvhN4Po%2BF2KUNDCl7jRlZLOhUiUR0GCmxJxcexmU%3D)