--- title: "Selecting the authorization type using the configuration menu" slug: "selecting-the-authorization-type-using-the-configuration-menu-2" updated: 2026-11-17T09:22:59Z published: 2026-11-17T09:22:59Z canonical: "docs.trellix.com/selecting-the-authorization-type-using-the-configuration-menu-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Selecting the authorization type using the configuration menu Use the menu options in this section to select a specific authorization method. To select the authorization type: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter configuration CAC configuration menu: `npadmin@ia(config)# authentication` 6. In the CAC/PIV configuration menu, select 1 to access the Authentication Mechanism menu. `Authentication Mechanisms: 1: PAM 2: LDAP 3: Radius 4: TACACS+ 5: Active Directory 6: PKI 7: PKI w/ LDAP 8: PKI w/ Active Directory C: Cancel changes and exit` 7. Select `5` to choose AD. Press `Enter`. 8. Select `Q` to save your settings and exit the menu.