--- title: "Send the captured file to an SCP server" slug: "send-the-captured-file-to-an-scp-server" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/send-the-captured-file-to-an-scp-server" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Send the captured file to an SCP server To capture and send the files to the SCP server: ## Task 1. For a standalone Sensor, select **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. For Sensors in a stack, select **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. 2. From the **Send Captured Packets To** drop-down list, select **An SCP Server**. 3. Enter the SCP Server credentials, **SCP Server IP**, **SCP Server User Name** and **SCP Server Password**. 4. Type the maximum file size in the **Maximum Capture Size (MB)** field. > [!NOTE] > Note > > The maximum file size can be configured up to the maximum value of Sensor defined limits. 5. Click **Test Connection**. The **Test Connection** operation establishes a connection between the Sensor and the SCP server, and creates a test file. This is to verify whether the server is reachable and the files can be written. > [!NOTE] > Note > > The **Test Connection** operation can fail due to MACs and Ciphers mismatch between the Sensor and SCP server. 6. Configure the **Capture Rules**. > [!NOTE] > Note > > If you are configuring for a Sensor from a stack of NS9500 Sensors, you cannot configure rules at an interface level. You have to configure to **All** interface. 7. Click **Save** to save the capture settings. 8. Click **Start**. When the maximum file size is reached, the Sensor uploads the captured file to the Manager. 9. To stop the packet capture session, before the configured maximum file size, click **Stop**. The Sensor sends the captured file to the SCP server. 10. Click **Cancel**. The Sensor stops the capture and deletes the captured file. > [!NOTE] > Note > > If file upload has started, then it cannot be canceled.