--- title: "Send the captured file to the Manager" slug: "send-the-captured-file-to-the-manager-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:19Z published: 2026-11-19T12:26:19Z canonical: "docs.trellix.com/send-the-captured-file-to-the-manager-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Send the captured file to the Manager To start the capture and send the captured file to the Manager: ![Packet_Capture_1.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-78639aa3-aaf8-7863-4079-9152b893372c(3).png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A22%3A13Z&se=2026-11-20T09%3A22%3A13Z&sr=c&sp=r&sig=bpjXp4PuAHINp5eQD0gwJ9kll8shtVDKRC8GBVArhJk%3D) 1. For a standalone Sensor, go to **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. For Sensors in a stack, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. For member Sensors in a cluster, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. 2. From the **Send Captured Packets To** drop-down list, select **The Manager**. 3. Type the maximum file size to be captured in the **Maximum Capture Size (MB)** field. > [!NOTE] > Note > > The maximum file size can be configured up to the maximum value of Sensor defined limits. 4. Configure the **Capture Rules**. > [!NOTE] > Note > > In the **IP Version**, type of IP setting: > > - For **ALL** and **ARP** traffic, IP setting (**IPv4**) > - For **IP** traffic, IP setting (**IPv4**/**IPv6**) 5. Click **Save** to save the capture settings. > [!NOTE] > Note > > If you are configuring for a Sensor from a stack of NS9500 Sensors, you cannot configure rules at an interface level. You have to configure to **All** interface. 6. Click **Start**. When the maximum file size is reached, the Sensor uploads the captured file to the Manager. 7. To stop the packet capture session, before the configured maximum file size, click **Stop**. The Sensor pushes the captured file to the Manager. 8. Click **Cancel**. The Sensor stops the capture and deletes the captured file. > [!NOTE] > Note > > If file upload has started then it cannot be canceled.