--- title: "Send the captured file to the Manager" slug: "send-the-captured-file-to-the-manager" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/send-the-captured-file-to-the-manager" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Send the captured file to the Manager To start the capture and send the captured file to the Manager: ## Task 1. For a standalone Sensor, select **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. For Sensors in a stack, select **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Packet Capturing** → **Capture Now**. 2. From the **Send Captured Packets To** drop-down list, select **The Manager**. 3. Type the maximum file size to be captured in the **Maximum Capture Size (MB)** field. > [!NOTE] > Note > > The maximum file size can be configured up to the maximum value of Sensor defined limits. 4. Configure the **Capture Rules**. > [!NOTE] > Note > > If you are configuring for a Sensor from a stack of NS9500 Sensors, you cannot configure rules at an interface level. You have to configure to **All** interface. 5. Click **Save** to save the capture settings. 6. Click **Start**. When the maximum file size is reached, the Sensor uploads the captured file to the Manager. 7. To stop the packet capture session, before the configured maximum file size, click **Stop**. The Sensor pushes the captured file to the Manager. 8. Click **Cancel**. The Sensor stops the capture and deletes the captured file. > [!NOTE] > Note > > If file upload has started then it cannot be canceled.