--- title: "Sending a management request in a NAT deployment using the appliance Web UI" slug: "sending-a-management-request-in-a-nat-deployment-using-the-appliance-web-ui-2" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-07T20:58:12Z published: 2026-09-07T20:58:12Z canonical: "docs.trellix.com/sending-a-management-request-in-a-nat-deployment-using-the-appliance-web-ui-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sending a management request in a NAT deployment using the appliance Web UI Use the **Add to CM** page in the Malware Analysis Web UI to initiate a request to be added to a Central Management System appliance. ![All_Settings_AddToCMS_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cb6e6163-4ab3-6ea4-cd3b-4a268158dad8(7).png?sv=2026-02-06&spr=https&st=2026-11-20T05%3A50%3A21Z&se=2026-11-20T06%3A50%3A21Z&sr=c&sp=r&sig=%2FKXH61Aip%2F1XwYaMpu4NOdBoz1litvwtnYt4PZhWkhA%3D)**To send a management request:** > [!NOTE] > Note > > If the appliance has never sent a management request, ensure that it meets the requirements described in [Preparing an appliance to send a management request in a NAT deployment](/network-and-platform/docs/preparing-malware-analysis-appliance-send-management-request-nat-deployment). 1. Log in to the requesting Malware Analysis appliance Web UI. 2. Click the **Settings** tab. 3. Click **CM Network** on the sidebar. 4. In the **CM IP Address** and **Port** boxes, do one of the following: - *If the* Central Management System *is not behind a NAT gateway or is behind the same NAT gateway as the appliance*: Enter the Central Management System IP address and remote management port. The default port is 22. - *If the* Central Management System *is behind a NAT gateway different from the appliance NAT gateway*: Enter the accessible Central Management System IP address and port. 5. In the **CM Username** and **CM Password** boxes, enter the admin credentials the appliance should use to log in to the Central Management System appliance to announce itself. 6. If the Malware Analysis appliance is behind a NAT gateway, select the **Appliance Behind NAT** checkbox. 7. Click **Send Request**. A message informs you that the request succeeded or failed, or that the appliance is already being managed by the Malware Analysis appliance. If the request succeeded, a Central Management System administrator can accept or reject the request. ![All_AddToCMSuccessMsg_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fbb86e7a-c777-f48a-f778-45cac06e78c5(7).png?sv=2026-02-06&spr=https&st=2026-11-20T05%3A50%3A21Z&se=2026-11-20T06%3A50%3A21Z&sr=c&sp=r&sig=%2FKXH61Aip%2F1XwYaMpu4NOdBoz1litvwtnYt4PZhWkhA%3D) > [!NOTE] > Note > > See the *Central Management System Administration Guide* for information about accepting the requests and adding the appliances to the Central Management System appliance.