--- title: "Sending a management request in a NAT deployment using the appliance Web UI" slug: "sending-a-management-request-in-a-nat-deployment-using-the-appliance-web-ui" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T21:25:27Z published: 2026-09-08T21:25:27Z canonical: "docs.trellix.com/sending-a-management-request-in-a-nat-deployment-using-the-appliance-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sending a management request in a NAT deployment using the appliance Web UI Use the **Add to CM** page in the File Protect Web UI to initiate a request to be added to a Central Management System appliance. ![All_Settings_AddToCMS_scap.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-cb6e6163-4ab3-6ea4-cd3b-4a268158dad8(6).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A10%3A26Z&se=2026-11-20T07%3A10%3A26Z&sr=c&sp=r&sig=rdf49ulnIlC9h43gLtlgvKyEhCTd6FTTEKu05YDKlw0%3D)To send a management request: 1. If the FX appliance has never sent a management request, ensure that it meets the requirements described in [Preparing an File Protect appliance to send a management request in a NAT deployment](/docs/preparing-file-protect-appliance-send-management-request-nat-deployment-1). 2. Log in to the requesting File Protect appliance Web UI. 3. Click the **Settings** tab. 4. Click **CM Network** on the sidebar. 5. In the **CM IP Address** and **Port** boxes, do one of the following: - *If the* Central Management System *is not behind a NAT gateway or is behind the same NAT gateway as the appliance*: Enter the Central Management System IP address and remote management port. The default port is 22. - *If the* Central Management System *is behind a NAT gateway different from the appliance NAT gateway*: Enter the accessible Central Management System IP address and port. 6. In the **CM Username** and **CM Password** boxes, enter the admin credentials the appliance should use to log in to the Central Management System appliance to announce itself. 7. If the File Protect appliance is behind a NAT gateway, select the **Appliance Behind NAT** checkbox. 8. Click **Send Request**. A message informs you that the request succeeded or failed, or that the appliance is already being managed by the File Protect appliance. If the request succeeded, a Central Management System administrator can accept or reject the request. An example success message is shown below: ![All_AddToCMSuccessMsg_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-fbb86e7a-c777-f48a-f778-45cac06e78c5(6).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A10%3A26Z&se=2026-11-20T07%3A10%3A26Z&sr=c&sp=r&sig=rdf49ulnIlC9h43gLtlgvKyEhCTd6FTTEKu05YDKlw0%3D) ### Note See the *Central Management System Administration Guide* for information about accepting the requests and adding the appliances to the Central Management System appliance. :