--- title: "Sending SNMP traps" slug: "sending-snmp-traps-1" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-12T20:32:10Z published: 2026-09-12T20:32:10Z canonical: "docs.trellix.com/sending-snmp-traps-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sending SNMP traps The Central Management System appliance and the Network Security appliances in the HA pair send Simple Network Management Protocol (SNMP) data to convey abnormal conditions to administrative computers that monitor and control them. The administrative computers are called *SNMP managers*. - If SNMP is configured on the Central Management System appliance, by default the Central Management System appliance pushes the **nxha-health-failure** event (known as a *trap*) to the SNMP manager. - If SNMP is configured on the Network Security appliances, you can use the `snmp-server notify event ha-status-change` command to enable the appliances to push the **ha-status-change** event to the SNMP manager. The **ha-status-change** event pertains to the restricted license, and is pushed for changes such as when the grace period starts, the remaining days in the grace period changes, and the restricted license expires. ### Note For details about configuring SNMP and enabling and disabling events, see the *Central Management System Administration Guide* and *Network Security System Administration Guide*. :