--- title: "Sensor CLI commands related to Trellix Intelligent Sandbox integration" slug: "sensor-cli-commands-related-to-trellix-intelligent-sandbox-integration-1" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/sensor-cli-commands-related-to-trellix-intelligent-sandbox-integration-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor CLI commands related to Trellix Intelligent Sandbox integration The following are the Sensor CLI commands that show information related to Trellix Intelligent Sandbox integration. - The `status` command additionally shows information related to the integration. - `Status` — Shows whether the communication channel between the Sensor and Trellix Intelligent Sandbox is up or down - `IP` — The IP address of the Trellix Intelligent Sandbox appliance with which the Sensor is integrated - `Port` — The port number used for the communication ![GUID-B5863707-F66C-4841-84C9-77EB20826867-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ac47106f-4327-21f1-b2b3-8926091a603b.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A22%3A18Z&se=2026-11-20T09%3A22%3A18Z&sr=c&sp=r&sig=eMAGFWSzc9WZ4%2Bffdh7gIgsYBhpfRJ0QNw28A2DLM4o%3D) - From the debug mode, the `switch matd channel` command enables to select TCP or SSL channel for communication with Trellix Intelligent Sandbox. - The `show malwareenginestats command` additionally shows the statistics for the Trellix Intelligent Sandbox engine. - A Sensor, for its connections through its management port with a Trellix Intelligent Sandbox appliance, uses AES128-GCM-SHA256 cipher by default. To know if the connection is currently encrypted, use `show amchannelencryption status` on the Sensor CLI. > [!NOTE] > Note > > SSL encryption when enabled can have performance degradation, which may impact the analysis of large files and high-volume of files. To transfer large files, switch to TCP channel on the Sensor and Trellix Intelligent Sandbox. Use command `switch matd channel tcp` on Sensor CLI and `set nsp-tcp-channel enable` on Trellix Intelligent Sandbox. For more information on these commands, refer to Trellix Intrusion Prevention System Product Guide.